Last week, we used Scratch-foam to make prints. The lines we carved into the foam stayed white, while everything else was inked. This week, we were adding to our plate by using hot glue. When the lines of hot glue dried, they were hard and raised, so theoretically the lines would get inked more than the surface.
The first step is to draw on the acetate with the hot glue. The boys and I made a pencil sketch on a piece of paper first, and then placed our sketch under the clear acetate so we could trace.
(The washing machine became our gluing station, so we could keep it separate from the inking and printing area!) It takes a bit of practice to get the feel for how the glue flows from the glue gun. It’s not easy. I suggested we all use simple designs, without a lot of detail, and not expect perfection.
With G, I pressed the trigger and she directed the gun. Here’s her plate.
Once the glue is dry, ink it with the brayer like any other printing plate. We used paper the same size as the acetate sheets, so we lined them up, pressed with our hands, and peeled. Here’s one of N’s. (Click to embiggen; these prints are much lighter than last week’s.)
And one of V’s.
You can see that a lot of the background comes through as well. This isn’t the best technique to use if you want a super clean line print, and V, especially, did not like this aspect. N was quite pleased with his prints. Both boys prefer the scratch-foam, but they agree we should try all the printmaking techniques we can so we know what’s at our disposal.
Here’s one of mine (top) and one of G’s (bottom).
G’s favorite part of printmaking, hands down, is rolling the ink-filled brayer on the plate. Perhaps I need to get her a mini paint roller…
We wondered later if it would have been possible to rub away some of the background ink with a paper towel before making a print, but it might be hard to “clean” the plate that way before the ink dried (water-soluble ink dries faster). When I used this technique with an actual press, the same thing happened with the background, so I don’t think we did anything wrong. It’s simply a different effect–and it’s good to know how to get various effects. The more tools and techniques we explore, the greater the chance that we’ll know just how to realize specific ideas.
One more picture–of the paper that was under the plate N was inking. I like how it looks!
We’re not done with printmaking yet. Stay tuned!
Do you have any favorite printmaking techniques?