We made these lanterns to celebrate winter solstice, but they’ll be welcome all through winter. We made one version appropriate for older kids, and one better suited to younger kids.
Tin Can Lanterns
Materials: Clean tin can (I used 28-oz tomato cans) with the lid taken off with the type of can opener that doesn’t leave sharp edges; water; hammer and nail
Age level: Elementary & up
Fill the can with water and freeze overnight, either in the freezer or outside. I left room at the top for the water to expand, but it expanded downward for some reason. (If you want your lantern to have handles, you need to be able to punch a hole up near the top, so you’ll need ice up there.)
When the water is frozen, gently tap out a design using a hammer and nail.
We did this in the living room, as you can see, just spreading out a towel and using some old cloth diapers to brace the cans. We made our holes in the ridges of the can, so it was easier to brace the nail. It only takes a gentle tap.
I told the boys to turn the can so that they were always banging the nail straight, not at an angle. They’re 7 and 10, and both of them were easily and safely able to do this. G “helped” me by holding my hammering hand, but I wanted her to be able to create her own lantern without help, so I took inspiration from these jar luminarias at Family Fun.
Aluminum Foil Jar Lanterns
Materials: Glass jar; aluminum foil cut to fit; nail, toothpick, pushpin, or similar (to make holes); foam, cork, cardboard, or similar (as backing while making holes); tape (I used double sided)
Age level: All ages, and suitable for preschoolers
I happened to have a roll of cork lying around the studio, so I spread it out on the table and lay the piece of foil on top of it. G used a nail to punch the holes because it made a slightly bigger opening than a toothpick. I showed her on a scrap of foil how to punch the hole up and down, and how dragging the nail (like you’re drawing with it) will tear the foil. Then she punched her holes.
When she was done, I wrapped the foil around the jar, tucking a little under the bottom and a little around the top edge. I used a piece of double-sided tape to secure the overlap on the side. G ended up making two lanterns, of random design.
I placed tea lights in our cans and jars for use indoors. If you want handles on the tin can lanterns, punch a hole on either side at the top and string with ribbon, twine, or the like. But you need to have ice behind while you’re tapping the nail; otherwise the can will dent. (Also, you might not want to use a candle if you’re carrying the lantern; perhaps one of those battery-operated tea lights?)
Because my ice expanded downwards, the bottom of our cans were a little warped, but I just gave them a tap with my fist and they flattened enough to sit level on the table.
Happy Solstice! And now we turn, ever so slowly, towards the sun.